Following the legendary line of FM transmitters ESVA, of which were built over 12,000 pieces.
Suono Telecom now continuing the tradition introduce the new ESVB line, the best in our long 40 year
Technical specifications:
Power Output:...........................from 0 to max. continuously adjustable from front panel.
Frequency Range:....................87.5÷108.00 MHz, [ 66÷74 MHz (OIRT), 76÷90 MHz (JPN)]
Type of Modulation:...................Direct frequency modulation of carrier, F3E stereo and mono.
RF Output Impedance:..............50 ohm.
RF Output Connector: ..............N type
RF Output setting:.....................1W and 10W selectable
VSWR: .....................................1.5:1 Max with automatic fold-back VSWR prot. at all phase angles
Frequency Stability: ..................Internal TCXO ±2 ppm from -5 to +50°C (better on request)
Modulation Capability:...............over ±200 KHz
Audio Inputs: ............................L&R analog balanced, Unbalanced composite, AES, SCA, RDS
Operator interface setting:.......Encoder Push-Rotary
LCD Display:.............................Oled hi-definition graphic type
Frequency Control: ..................Synthesizer μprocessor controlled.
Programming step:....................10 KHz increments
Interface remote control:...........N°2 RS485 ports RJ45 back panel
PC Interface: USB: ...................connector Type B female front panel
Telemetry:.................................RJ45 LAN connection with WEB-Server
Monitor RF:...............................-10 dBm, BNC-F connector
Off Lock RF Muting: .................< -80 dBc.
RF Harmonics: .........................Exceeds ETSI/CCIR/FCC requirements.
RF Spurious: ............................Exceeds ETSI/CCIR/FCC requirements.
Preemphasis: ...........................Flat/50/75μs selectable from front panel.
Asynchronous AM S/N Ratio:....-65 dB below ref.100% AM modulation @ 400 Hz.
Synchronous AM S/N Ratio: .....-60 dB below ref. 100% AM mod. 400 Hz with FM 100%
AC Power Factor:......................0.95 typical at 220VAC
Operating temperature: ............-10°C to +50°C.
Max Operating Altitude: ............> 3000 mt.
Relative Humidity Range: .........0 to 95% non condensing.
MONΟ
Operational Modes: ..................Mono (L+R)
Input Impedance: ......................600 ohm or 10 Kohms balanced.
Input Level: ...............................-6 to +12 dBm in 0,5dB step (Other range on request)
Input Connector:.......................XLR female - balanced.
Audio Frequency Response:.....±0.15 dB, 30 Hz to 15 KHz.
Preemphasis setting:.................0, 50μS, 75μS
Audio Filter Attenuation:............< -55 dB @ 19 KHz, < -50 dB 20 KHz to 100 KHz
T H Distortion + Noise:..............< 0.05% @ 400 Hz
FM S/N Ratio:............................better than -80 dB RMS ref. ±75 KHz 50μs deemphasis.
MULTIPLEX
Composite Input Impedance:.....600 ohm or 10 Kohms balanced.
Composite Input Level:..............-12 to +6 dBm in 0,5dB step (Other range on request)
Input Connector:........................BNC female.
AES/EBU Input Connector:........BNC female
Composite Response:...............±0.2 dB, 30 Hz to 100 KHz.
THDistortion + Noise:................0.05% @ 400 Hz
Intermodulation Distortion:.........0.05%, 1 KHz/1.3 KHz, 1:1 ratio
FM S/N Ratio:........................... better than -80 dB RMS ref. ±75 KHz 50 μs de-emph. decoded.
STEREO CODER
Audio Input Impedance:.............600 ohm balanced, 15 Kohm unbalanced.
Audio Input Level:......................-6 to +6 dBm in 0,5dB step (Other range on request)
Input Connector:........................XLR female.
Audio Frequency Response:.....±0.15 dB, 30 Hz to 15 KHz.
Preemphasis setting:.................0, 50μS, 75μS
THDistortion + Noise:.................0.05% @ 400 Hz
Intermodulation Distortion:.........0.05%, 1 KHz/1.3 KHz, 1:1 ratio
FM S/N Ratio:............................-80 dB RMS at ±75 KHz 50 μs de-emphasis.
Pilot Frequency: ........................19 KHz ± 1 Hz
38 KHz Suppression:.................-60 dB (typ. -70 dB)
Audio Filter Attenuation:.............< -55 dB @ 19 KHz, < -50 dB 20 KHz to 100 KHz
Stereo Separation:.....................30÷100 Hz = -50 dB, 100Hz÷15 KHz = -60 dB
Crosstalk attenuation:................Main to Sub -50 dB 30 Hz to 15 KHz below 100% Mod.
SCA-RDS 1&2
Input Level:................................-6 to +6 dBm in 0,5dB step (Other range on request)
Impedance:................................10k ohms unbalanced
Connector:.................................BNC female
Amplitude Response:.................+/- 0.1dB; 53Hz to 100kHz
MECHANICAL/PHYSICAL
Height: ....................................... 132 mm (3HE )
Width: ........................................ 19" (48.3 cm) EIA Rack Mount
Depth: ....................................... 22" (56.5 cm) with connectors
Weight:....................................... 18 kg 39.5 lbs unpacked
